Follow Me on Pinterest
     
Need Help?
Want a targeted surfboard reccommendation? Just fill out the form below and we'll get you a laser targeted recommendation specific for you.

* = Required Field


I respect your email privacy and promise to never share or rent your personal information to any third party.

If you're looking for a used surfboard to save yourself some coin this is the place.

Right now we have the following used surfboards.


Used 5'6 Bean NexGen with Traction

Used 5'6 Bean NexGen with Traction

5'6" x 21 1/4" x 2 3/4. This Bean was surfed a handful of times and the customer determined he needed a bit bigger one for his body size. It is in perfect condition and has a traction pad also, so you are all set. Fun, fast small wave board. Quad fin set up, single to double concave.

$400


Used 6'4 Whip it Shortboard NexGen

Used 6'4 Whip it Shortboard NexGen

6'4" x 19 1/2" x 2 1/2". Single to Double Concave on this shortboard with a slight "hip" at the tail which makes it ideal for mushy surf. Watertight with no damage.

$300


Used 6'4 Jack NexGen

Used 6'4 Jack NexGen

6’4 x 20 1/2 x 2 3/4. Used in great condition. Surfed a few times so there are a few tiny pressure dents, but this baby is essentially new. Nexgen epoxy allows for good flex and responsiveness. Really versatile board, 5 fin set up, Single to double concave double winged swallow tail. Surfs well in sloppy mushy waves to well overhead.

$425


Used 6'4 Jack Epoxy

Used 6'4 Jack Epoxy

6’4 x 20 1/2 x 2 3/4. Used in great condition. A handful of pressure dents and a tiny spot on the tail with paint rubbed off, but watertight and ready to ride. Really versatile board, 5 fin set up, Single to double concave double winged swallow tail. Surfs well in sloppy mushy waves to well overhead.

$350


Used Flying Fish 6'4"

Used Flying Fish 6'4"

6'4" x 21" x 2 1/2" Used Degree 33 EPOXY surfboard for sale. Flying Fish model. It suffered a cracked tail but has since been repaired and is ready to get back out there! This board is very Light, Boyant and Strong thanks to the NexGen Epoxy and EPS foam. Swallow tail for a smooth turns and ride. NexGen epoxy- combining the great flex and responsiveness of a fiberglass board, with the durability of an epoxy.

$300


Used 7' Jack Nexgen

Used 7' Jack Nexgen

7'0" x 21 1/4" x 2 3/4" .Board is watertight and in excellent condition. Pressure dents on the deck, but no other damage. Ready to go for $85 less than a new one. Versatile board, with a double wing swallow tail, single to double concave and 5 fin set up so you can run it as a quad or thruster.

$400


Used 8'6 Ultimate Nexgen

Used 8'6 Ultimate Nexgen

8'6" x 22 3/4" x 2 7/8" Used Ultimate Nexgen. Two repaired spots on the deck, and one fin box has been completely replaced. Watertight. NexGen epoxy- combining the great flex and responsiveness of a fiberglass board, with the durability of an epoxy Completely Hand Shaped EPS Foam (not just hand finished) Flat through the middle, double concave at the tail, beveled rail, squash tail, 2+1 FCS compatible fins included (6" center fin and 2 side bite fins) Approximate Volume: 70 Liters Designed by shaper Bill Minard

$375


Used 9' Ultimate NexGen

Used 9' Ultimate NexGen

9' x 23" x 3"
*Used with two small repair spots on the deck. Watertight.
NexGen epoxy- combining the great flex and responsiveness of a fiberglass board, with the durability of an epoxy
Completely Hand Shaped EPS Foam (not just hand finished)
Flat through the middle, double concave at the tail, beveled rail,
squash tail, 2+1 FCS compatible fins included (8" center fin and 2 side bite fins)
Approximate Volume: 79 Liters
Designed by shaper Bill Minard

$395


Used 9' Ultimate NexGen

Used 9' Ultimate NexGen

This is a brand new 9' Ultimate NexGen that was sadly damaged in transit.
It has a small pressure dent on the top deck along the left rail. Totally watertight and never been surfed.

$400


Used 10' Ultimate NexGen Longboard

Used 10' Ultimate NexGen Longboard

10' x 23 1/2 x 3 1/4 Ultimate Longboard. Board has normal pressure dents on the deck. Has had a repair on the nose and on the bottom by the fin boxes. (About the size of a quarter) Along the right rail, the board is soft and caved in a bit, but will still perform well and is watertight). NexGen epoxy- combining the great flex and responsiveness of a fiberglass board, with the durability of an epoxy. Flat through the middle, double concave at the tail, beveled rail, squash tail, 2+1 FCS compatible fins.
Approximate Volume: 97 Liters
Designed by shaper Bill Minard

$275


Used 10' Ultimate Nexgen Long Board

Used 10' Ultimate Nexgen Long Board

10' x 23 1/2 x 3 1/4 - This Ultimate is one of our Nexgen epoxy boards and is in good shape with minor use under its belt.
Professional repair along the rail towards the nose, and one at the nose. Color is matched white. Board is glassed heavy.
Completely hand shaped EPS foam, flat through the middle, double concave at the tail, beveled rails, and with a squash tail.
2+1 FCS compatible fins included (8" center fin and 2 side bite fins)
Satin Finish

$300


10'2 Hanger Nexgen Blue

10'2 Hanger Nexgen Blue

10'2 x 23 x 3 1/4 Custom Hanger Noserider Longboard. NexGen epoxy- great flex and responsiveness of a fiberglass board, with the durability of an epoxy Completely Hand Shaped EPS Foam (not just hand finished) Deep nose concave to channel with bevels to flat to double concave Rounded Pin Tail Pinched Rails 2+1 FCS compatible fins included (8" center fin and 2 side bite fins) Glossy Finish

$475


Our used surfboard stock is rotating enough that keeping the website current with pictures and descriptions can be overwhelming. Keep checking back, this section is usually updated weekly. We don't have a lot of used surfboards but when we do they move REALLY fast so let us know.

surfboard guarantee
The Best Surfboard Guarantee Available. Click Here for Info!

SURFER REVIEWS


"The surfboard worked better than I had hoped"
10886370

Luc & Holly,

Just got back from Costa Rica surf trip. Broke in the new Stokes 8'0" surfboard I got from you guys. Handles like a 6'0" instead of an 8'0". Wanted to let ya'll know "I LOVE MY NEW SURFBOARD". Hope you both are well.

Best Regards,

-Garrett King
Malibu, CA

"I LOVE MY NEW SURFBOARD"
11007621

Hey Luc and Holly,

I purchased a 5'8" fish surfboard from you yesterday. This morning the surf looked a bit mushy but I paddled out anyways for what turned out to be a very fun session. The surfboard worked better than I had hoped. Thank you so much!

-Scott Cox
Deerfield Beach, FL

"Oh my gosh, how wrong I was to think the surfboard we got from you might be a little lower quality"

But it wasn't until my husband got on it that we realized that it is truly an awesome surfboard.

It actually floated my husband better than his VERY expensive surfboard that is a foot longer and custom made! They caught waves they normally wouldn't even paddle for and rode them to shore.

Thanks again for allowing us to come to your home and helping us to pick the right surfboard.

-Christy Bartlett
San Diego, CA

Click here to leave your feedback on our surfboards!


More reviews of our surfboards here!